Some people panic as a result of discovering a glitch in their computer, but the problem is often not catastrophic. It is likely to be a simple glitch and can be fixed easily. There are a lot of reasons why your computer does not turn on, which are as follows:
Why won’t my Windows computer turn on?
Businessinsider, a tech news site, has revealed a common problem that can prevent your computer from turning on, which is a power issue. Either the internal power supply is faulty or there is no power coming into your computer.
Sometimes, your computer might be booting up, there is a screen error, the boot sequence or a particularly malicious program running, your computer also has components inside, or you plug in a faulty piece of hardware that crashes during startup, resulting in to early shutdown.
Stay tuned for more: From Brand Deals…How much does a creator with millions of YouTube and TikTok followers earn in one month?
How do you troubleshoot your Windows PC when it won’t turn on?
The technical site explained the ten most common solutions for setting up and running your computer, which are as follows:
Try a different power source
- If you try to turn on your computer and absolutely nothing happens, there are generally only two possibilities, either the computer’s internal power supply has failed to deliver electricity, in which case it may need to be replaced, or there is no electricity entering the computer.
- Unplug your computer from wherever it’s currently connected and plug it directly into a wall outlet, bypassing the UPS, surge blocker, or power strip. If nothing happens, make sure the outlet is working by plugging something else into it, like a desk lamp, and making sure it’s turned on.
- This choice is highly unlikely, but it is an easy fix. If you have a spare power cord available, replace it. If the original cord fails, you must restart the computer with the new cable.
Let the battery charge
If the computer that is not working is a laptop and the computer recently ran out of power, it is not unusual for it to fail to start even if it is now plugged into a power source, plug the laptop in, let the battery charge for at least half an hour and then try to turn it on again .
Decode the buzzer
Some computer motherboards emit a range of beeps at startup, a single beep indicating that everything is OK, while a long, continuous beep may indicate that the power supply has something seriously wrong.
There is no standard set of codes, but beeps can sound with both long and short beeps. Check your computer’s user manual, website, or technical support service for the cause of the error. Not all motherboards use beep codes, so this may not be a viable option.
Check your screen
If your computer seems to be working or at least making some noise but nothing appears on the screen, make sure the display is turned on and connected to your computer.
It’s also worth checking to make sure the brightness wasn’t accidentally set to zero. If that’s an option, try connecting your computer to a different monitor to see if that solves the problem.
Check your BIOS or UEFI settings
If your computer appears to be doing something but does not continue to boot into Windows, there are several possibilities for this. Standard expandable firmware) least friendly.
You may need to check your computer’s user manual for the specific key to press to access BIOS or UEFI, you also see instructions on the screen at startup telling you which key to press but no matter how you set up your computer, here The way you should be able to access BIOS or UEFI.
1. Turn on the computer.
2. Immediately press the boot key of your computer; Common keys include ESC, Delete, F1, or F2.
Once in BIOS or UEFI, make sure your computer is set up to boot to the primary hard drive, disable Fast Boot, and look for any other unusual settings that might be causing startup problems. You can also reset your BIOS or UEFI to factory defaults and see if that solves the problem.
Try safe mode
If you can access your computer’s BIOS, then you can also access Windows boot options if possible, start your computer in safe mode, sometimes it gets tricky, so here’s how to do it.
1. When you notice power lights or signs of activity, press and hold the Power button for 10 seconds to force shutdown your Windows PC.
2. Press the power button to turn on the computer.
3. Watch carefully, and at the first sign that the computer turns on, generally, you will see a logo on the screen with rotating dots below it, press and hold the power button for 10 seconds to turn it off again.
4. Turn it on and off a total of three times.
5. On the fourth boot, leave the computer turned on. It will enter Windows automatic repair mode.
6. On the Automatic Repair screen, click Advanced.
7. On the Choose an option screen, select Troubleshoot.
8. Click on Advanced.
9. Click on Startup Settings.
10. Click Restart.
11. When the computer restarts, choose Safe Mode with Networking by pressing the 5 key on the keyboard.
If your computer boots normally, try to undo any changes you’ve made recently to your computer This may include uninstalling recently added devices You may also want to return your computer to a clean install of Windows using the Reset this PC partition in Windows settings.
Separate everything unnecessary
A basic rule of thumb for troubleshooting is to eliminate as many variants as possible, so if you’ve tried the previous solutions and it’s still not clear what’s going on, unplug everything that isn’t completely necessary from your computer from the printer cable, scanner, webcam, and whatever. Another computer connected Now, try turning on the computer using only the power cord, monitor, mouse and keyboard.
Make sure nothing is spoiled
You can do this by removing the side panel of the computer and, with the power removed, making sure everything is still working properly. For the most part, that means checking your video card, sound card if you have one, memory sticks, and all power and data cables.
Check for ransomware or viruses
If your computer is clearly running but not booting properly to Windows, your computer may be infected with malware, such as viruses or ransomware.
Try to boot your computer not from the internal hard drive but from a USB drive, if you can successfully boot your computer in this way, then you can use anti-malware software to scan your computer for unwanted software.
Follow more: Find out immediately.. 3 signs that someone is reading your private messages on WhatsApp
You can follow the latest news through my lady’s account on Twitter