A new cathode design for sodium-ion batteries retains over 80 percent of its capacity after 500 cycles, while a standard version loses most of its power.
Researchers developed a way to stabilize high-voltage sodium-ion batteries (SIBs) by fixing chemical imbalances in the battery structure. This method targets O3-type layered oxide cathodes, which offer high theoretical capacity but often suffer from structural degradation when used at high voltages.
The team introduced a new descriptor called the ionic field strength disparity coefficient (η). This value measures the level of chemical-field heterogeneity among transition-metal (TM) ions. Researchers use this coefficient to select inactive dopants that reinforce the battery framework.
The study appeared in the Journal of the American Chemical Society on October 20, 2026. A collaboration produced the work. It included the Haihe Laboratory of Sustainable Chemical Transformations and the Institute of High Energy Physics at the Chinese Academy of Sciences.
The China Spallation Neutron Source Science Center, Nanjing University of Science and Technology, and Nankai University also participated. To evaluate the design rule for O3-type SIB cathodes, the researchers used computation, electrochemical testing, structural analysis, and synthesis.
At high voltages of 4.0 V or higher, deep sodium extraction can weaken the electrostatic screening between layers in the cathode. This process often leads to slab gliding and phase transitions. These changes compromise how the battery reverses its electrochemical state.
Specifically, these desodiated frameworks are prone to redox-coupled distortion of TMO6 octahedra within the transition metal (TM) slabs. The researchers found that adding electrochemically inactive ions with intermediate ionic field strengths can help compensate for disparities among redox-active ions. The coefficient η is determined by dividing the standard deviation of the ionic field strength (Φ) of all TM ions by their average value.
The value for ionic field strength (Φ) is set as Φ = Z/r^2, where Z is the ionic charge and r is the ionic radius. This approach lowers the η value and also mitigates local structural distortion during battery operation.
The team tested the design rule by comparing a low-η cathode to a high-η analogue. They used synthesis, structural analysis, electrochemical testing, and computation. The low-η material followed a more reversible structural evolution path. It avoided the high-voltage phase transitions that occurred in the high-η sample.
Through synchrotron X-ray absorption spectroscopy, strain mapping analyses, and first-principles calculations, the researchers said the low-η sample demonstrated reduced lattice strain and enhanced structural reversibility.
| Cathode Type | Ionic Field Strength Disparity (η) | Capacity Retention (500 cycles at 10C) |
|---|---|---|
| Low-η Cathode | 0.34 | More than 80% |
| High-η Cathode | 0.395 | 22% |
Cathode stability is linked to how much the ionic field strength shifts during use. This approach establishes a quantitative framework for screening inactive dopants. It links ionic field strength homogeneity to TM-O bonding, lattice-strain evolution, and structural reversibility.
The descriptor also enables composition-guided dopant screening. The authors said η captures local chemical-field disparities that average composition, radius, or valence cannot resolve. They said lowering it helps synchronize TM–O bond changes and phase evolution during deep desodiation.
Because η is derived using the cation fraction, ionic radius, and formal valence, it applies to other O3-type layered oxides with multiple components. This could allow developers to narrow down potential dopant candidates before they begin expensive cell testing.