Nominal Li0.5Cr0.5Fe2O4 nanoparticles were synthesized by a glycine-assisted sol-gel auto-combustion route across precursor pH values of 1, 3, 5, 7, and 9 to determine how pH-dependent precursor chemistry affects phase ordering, microstructure, porosity, and magnetism.
Thermogravimetric analysis and differential scanning calorimetry showed that the principal nitrate-glycine decomposition takes place between approximately 200 and 400 °C, according to Nature data. Researchers treated the gradual high-temperature upturn in several thermogravimetric traces cautiously as an apparent mass gain stemming mainly from baseline or buoyancy drift, while minor oxidation by residual oxygen could not be excluded.
Rietveld refinement using the ordered lithium-ferrite structural model P4332 described a predominant ordered cubic spinel phase. The weak (210) superstructure reflection aligned with cation ordering rather than a separate impurity. Scherrer crystallite size varied non-monotonically from 16.19 to 35.65 nm, while Williamson-Hall slopes yielded apparent compressive microstrain magnitudes of 14.5 to 49.3 × 10− 4.
Field-emission scanning electron microscopy revealed strongly agglomerated particles displaying image-derived mean sizes of approximately 33.00 to 37.50 nm. A reduction in the Brunauer-Emmett-Teller surface area was observed, falling from 25.243 to 10.301 m2 g− 1 even though crystallites were smaller at high pH, suggesting that the nitrogen-accessible surface area was primarily influenced by particle aggregation and the reduction of available pore space.
All samples exhibited soft ferrimagnetic behavior, with saturation magnetization ranging from 20.09 to 21.09 emu g− 1 and coercivity spanning 89.93 to 124.1 Oe. The pH 7 sample displayed the highest saturation magnetization, whereas pH 9 yielded the smallest crystallites, largest microstrain magnitude, lowest surface area, and highest coercivity. Electron spin resonance linewidths varied non-monotonically from 161.8 to 212.0 mT.
The precursor pH influences the material by driving interconnected variations in A-B sublattice interactions, defect structure, surface accessibility, nucleation, and the combustion process. Post-calcination lithium content and exact cation occupancies were not independently determined in the investigation.