2024-04-25 11:18:51
The passage of time, temperature changes, humidity… are some of the factors that affect the good condition of the doors of our home. Solving some of the small breakdowns they suffer in time is key to keeping them in optimal condition.
Although they are one of the most important elements of our home, doors are usually one of the most forgotten when it comes to cleaning and maintenance from the same.
We must not forget that its function is essential: thermal and acoustic insulation, safety, protection, decorative function…and that is why we must preserve them in the best possible conditions to extend its useful life.
With some frequency, the doors to the street or access to balconies in our house suffer some type of breakdown that, if not resolved, can lead to something major. Wooden doors are often prone to swelling due to weather changes and exposure to moisture. For their part, PVC doors They guarantee high durability, easy maintenance and good thermal and acoustic insulation of our home, which results in lower energy costs and greater financial savings.
In the doors between rooms, access to the living room, etc., it is normal for small breakdowns and damages to occur due to use. From Healthy Housing we share some simple recommendations for all audiences, even those who are not very handy.
- The door creaks. That annoying noise that the door generates when it squeaks is usually due to a lack of oil or deterioration of the hinges. The solution is to use a lubricant that helps prevent the metal pieces from rubbing against each other and causing that noisy squeak. It is generally used for this work oil, grease and wax, although the first option is usually the most indicated, especially if it is a specific oil for this function. It must be taken into account that the Regular cleaning of the hinges is an important step to prevent the door from squeaking. To do this, use a soft cloth and warm soapy water to clean any dirt or debris from the hinges. Afterwards you have to dry well with a towel.
- The door rubs the floor. There are several solutions when this problem occurs in wooden doors, the most common is file the bottom edge of the door. To do this, he removes the door from its hinges and, using a file or an electric sander, carefully removes small amounts of wood from the bottom edge until the door stops rubbing the floor. Another practical solution is to use a adhesive gasket or weather stripping on the bottom edge of the door. These materials are usually made of rubber or silicone and easily adhere to the edge of the door. By placing them, the door will rise slightly and avoid rubbing with the floor.
- A hinge breaks. It is important to buy one that fits correctly, for which it is advisable to measure the height and width, or even take a photo so that the differences between the new and old model are easy to detect when comparing them at home. Once you find the right size, You must remove all the screws that hold the old hinge in place with a screwdriver. Then the new hinge would have to be placed in its correct position and secure it with the supplied screws, as well as with wall anchors if necessary.
- Handle change. Before purchasing a new latch, it is necessary to check which side it is placed on and which direction it is activated. Depending on whether it is left or right, it will be necessary to purchase a conventional model or a reversible model (which can be installed in any position). Using a suitable screwdriver, start by loosen the screws that are placed on the plate and on the handle trim. Next, remove the handles and along with them, also the entire assembly, including the part of the plate with the slip. When it’s time to install the new door handle, we just have to do the reverse task. The new handle is inserted into the hole until the end and, placing the handles in their original position, the screws are tightened again..
- Cover the scratches. For wooden doors, one possibility is sand the surface with fine-grain sandpaper and apply a thin layer of varnish for wood with a sponge or brush. Another option is use natural wax, applying it with a cloth to the damaged area and rubbing or using a soft sponge to polish the furniture with the wax. For street doors made of foliated PVC, there are touch-up markers that perfectly camouflage small scratches.
These are some of the most common problems with the doors of our home and the remedies that usually give the best results. Although if our doors are already very damaged, it is best to change them and replace them with high-performance ones, such as those manufactured with systems Commerce.
You may also like
Published by: Healthy Housing
#solve #door #problems #Healthy #Housing